Influence of propagation direction on operation performance of rotating detonation combustor with turbine guide vane

Due to the pressure gain combustion characteristics, the rotating detonation combustor (RDC) can enhance thermodynamic cycle efficiency. Therefore, the performance of gas-turbine engine can be further improved with this combustion technology. In the present study, the RDC operation performance with a turbine guide vane (TGV) is experimentally investigated. Hydrogen and air are used as propellants while hydrogen and air mass flow rate are about 16.1 g/s and 500 g/s and the equivalence ratio is about 1.0. A pre-detonator is used to ignite the mixture. High-frequency dynamic pressure transducers and silicon pressure sensors are employed to measure pressure oscillations and static pressure in the combustion chamber. The experimental results show that the steady propagation of rotating detonation wave (RDW) is observed in the combustion chamber and the mean propagation velocity is above 1650 m/s, reaching over 84% of theoretical Chapman-Jouguet detonation velocity. Clockwise and counterclockwise propagation directions of RDW are obtained. For clockwise propagation direction, the static pressure is about 15% higher in the combustor compared with counterclockwise propagation direction, but the RDW dominant frequency is lower. When the oblique shock wave propagates across the TGV, the pressure oscillations reduces significantly. In addition, as the detonation products flow through the TGV, the static pressure drops up to 32% and 43% for clockwise and counterclockwise propagation process respectively.     

耐1200℃陶瓷瓦重复使用性能

针对目前比较成熟的耐1 200℃陶瓷瓦开展了1 200℃多次重复热处理,研究了陶瓷瓦的结构和性能演变行为和重复使用性能。结果表明:1 200℃热处理20次后,耐1 200℃陶瓷瓦表现出良好的宏观热稳定性;重复热处理过程中,纤维间烧结,黏接熔融和石英纤维析晶及晶粒长大,使纤维直径发生变化,出现缩颈,进而导致了Z向收缩,收缩率达14%,从而使得压缩强度略有增大,隔热性能降低;经过1 260℃、11次单面辐射加热后,Z向收缩率为5.58%,隔热效果降低了7.59%,但隔热材料能够在6次重复加热后保持材料隔热性能不降低。     

高超声速气流中头锥逆喷防热流热耦合分析

作为一种主动冷却方式,逆向喷流结构对高超声速飞行器的热防护具有显著效果.为了对头锥逆喷的防热特性进行准确预测,采用流热耦合方法,对6马赫下的头锥逆喷结构的流动和传热进行数值研究.通过数值计算和实验对比,验证了湍流模型和流热耦合算法的准确性,获得了不同逆喷总压比下的流动特性,并且对不同逆喷总压比对流动和传热的影响进行了分...     

基于Petri网的C2S性能分析方法研究

给出了用时间连续随机Petri网和时间离散随机Petri网计算系统稳态概率的方法,并将其应用于指挥控制系统(C2S)的性能分析中,分析结果表明这种计算方法是可行的。     

Analysis of a production system in a general configuration

We consider a production system comprising multiple stations (or workshops) such as an entry station, a set of work stations, a central station, and an exit station, which are arranged in a general configuration. A worker (or a vehicle tool) is assigned to each station, who sends a part from the station to the destination station according to the required process path of the part. Any part is allowed to visit a work station more than once if its process path requires. We propose a new control strategy with the push policy for instructing each worker to send a part and the kanban mechanism for controlling the work‐in‐process (WIP) in each work station. As all work stations have limited local buffers, the central station is used for storing blocked parts temporarily. Such a production system is modeled as an open queueing network in a general configuration with a Markovian part sending policy and a machine no blocking mechanism. The queueing network is analytically characterized. Some important performance measures are compared with other control strategies. A semi‐open decomposition approach is applied to the queueing network for computing the blocking probabilities when parts arrive at the work stations. An algorithm is developed based on the semi‐open decomposition approach. Numerical experiments show the quality of the solutions obtained by the algorithm as well as a property of a performance measure. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 128–143, 2001     

一种用于舰船电力网络绝缘监测的弱电流传感器的设计

结合舰船电力网络绝缘监测装置进行支路电阻测量与故障支路判断时的需要 ,设计了采集漏电流信号的大口径弱电流传感器 ,并给出了试验数据 .设计出的传感器已用于实际装置 ,试验运行状况良好     

Economic design of a two-stage control chart based on both performance and surrogate variables

The traditional approach to economic design of control charts is based on the assumption that a process is monitored using only a performance variable. If, however, the performance variable is costly to measure and a less expensive surrogate variable is available, the process may be more efficiently controlled by using both performance and surrogate variables. In this article we propose a model for economic design of a two-stage control chart which uses a highly correlated surrogate variable together with a performance variable. The process is assumed to be monitored by the surrogate variable until it signals out-of-control behavior, then by the performance variable until it signals out-of-control behavior or maintains in-control signals for a prespecified amount of time, and the two variables are used in alternating fashion. An algorithm based on the direct search method of Hooke and Jeeves [6] is used to find the optimum values of design parameters. The proposed model is applied to the end-closure welding process for nuclear fuel to compute the amount of reduction in cost compared with the current control procedure. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 958–977, 1999     

采用M阶正交信号的DS-CDMA系统性能分析

随着移动通信的迅速发展 ,码分多址技术受到越来越多的关注。为了提高系统的抗干扰性能 ,在CDMA系统中采用了M阶正交信号。通过分析采用M阶正交信号的DS CDMA系统基带接收信号的统计性能 ,文中得出了多址、多径干扰下系统的误码率计算公式 ,并详细分析了系统的抗干扰性能。     

防空导弹制导雷达综合抗干扰能力评估

分析了地空导弹武器系统制导雷达面临的主要干扰及其所采取的主要抗干扰措施,一般层次分析法(AHP)在评估某些模糊概念时存在缺陷。基于模糊层次分析法(FAHP),构造了模糊一致判断矩阵,建立了防空导弹制导雷达综合抗干扰能力评估模型,该模型具有快速、易于操作等优点,解决了在评价制导雷达综合抗干扰能力时难以定量分析的问题。     

基于ADAMS软件的轮式车操纵稳定性仿真分析

为了更好地设计评价轮式车辆的操纵稳定性,利用ADAMS软件进行仿真建模分析,再依照相关国家标准进行评价得到客观结论。在汽车设计、评价过程中广泛应用ADAMS软件可以在设计前期对车辆性能进行预测,提高设计质量,缩短设计周期。